How do I know the ring will fit?
Know your size before you make any purchases. Every jewelry store has a set of measuring rings you can try, even if you don't buy anything. You can also use this ring sizing guide from Overstock.com:
In order to print the ring sizer, be sure that your printer is set to 100-percent--do not reduce the print size in your printer 'page setup' area. You can verify that the sizer printed correctly by measuring--from A to B should be exactly 3.5 inches. Once you've printed the sizer, cut it out and cut a slit for slot "A".
With the numbers facing out, wrap the sizer around the finger where the ring will be worn.
Pull tab B through slot A until the sizer is snug, making sure to allow for the knuckle.
The number aligned with slot A is your ring size.
If the measure lands between two numbers, your size is a half size--5.5, 6.5, etc. If half sizes are not available, order the next larger size.
|
|
